PLUS IICOMMAND REFERENCECOMMAND REFERENCE
$1B $40Models: PLUS II-USB[Name] Resets the printer.[Format] ASCII ESC @ Hex 1B 40 Decimal 27 64[Description] Cancels all the data in the print buff
$1B $4BModels: PLUS II-USB[Name] Turn on/off the status led[Format] ASCII ESC K n Hex 1B 4B n Decimal 27 75 n[Range] n = 0 n = 1[Description]
$1B $51Models: PLUS II-USB[Name] Enable underlined printing.[Format] ASCII ESC Q Hex 1B 51 Decimal 27 81[Description] After this command has been re
$1B $61Models: PLUS II-USB[Name] Selects the number of dot spaces.[Format] ASCII (dd) ESC a Hex (dd) 1B 61 Decimal (dd) 27 97[Description] By using
BIT 5 BIT 4 FUNCTION DESCRIPTION0 0 NormalBarcodewidth0 1 Double1 0 Triple1 1 Not usedBIT 6 FUNCTION DESCRIPTION- Not used -BIT 7 FUNCTION DESCRIPTION
$1B $68Models: PLUS II-USB[Name] Selects 42 columns.[Format] ASCII ESC h Hex 1B 68 Decimal 27 104[Description] On receiving this command, the printe
$1B $71Models: PLUS II-USB[Name] Disable underlined printing.[Format] ASCII ESC q Hex 1B 71 Decimal 27 113[Description] Disable underlined printing[
Bit Off/On Hex Decimal Function0,1Off 00 0 Cover close, paper present.On 03 3 Cover open or paper sensor not working.2,3Off 00 0 Paper-end sensor: pap
$1D $49Models: PLUS II-USB[Name] Transmit printer ID.[Format] ASCII GS I n Hex 1D 49 n Decimal 29 73 n[Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51[Description]
$1D $57Models: PLUS II-USB[Name] Prints n byte of a 200 dpi graphic line.[Format] ASCII GS W n d1...dn Hex 1D 57 n d1...dn Decimal 29 87 n d1...dn
Edit by:CUSTOM ENGINEERING S.p.A.Str. Berettine 2 - 43010 Fontevivo (PARMA) - Italyhttp: www.custom.bizAll rights reserved 2 Command Reference
3 ESC/POSTM EMULATIONThe following table lists all the commands for function management in ESC/POS Emulation of the printer. The commands can be trans
BARCODE COMMANDS$1B $63 ESC c Management of bar code printing$1D $48 GS H Select printing position of HRI characters$1D $68 GS h Select height of barc
Given below are more detailed descriptions of each command.$00Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name
$03Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Expanded printing.[Format] ASCII - Hex 03 Decimal 3[Desc
$0AModels: PLUS II-USB[Name] Print and line feed.[Format] ASCII LF Hex 0A Decimal 10[Range][Description] Prints the data in the buffer and feeds one
$0DModels: PLUS II-USB[Name] Print and carriage return.[Format] ASCII CR Hex 0D Decimal 13[Range][Description] When autofeed is “CR enabled”, this c
$10 $04Models: PLUS II-USB[Name] Real-time status transmission.[Format] ASCII DLE EOT n Hex 10 04 n Decimal 16 4 n[Range] 1 ≤ n ≤ 4; n=20[Descripti
n=3: Error statusBIT OFF/ON HEX Decimal FUNCTION0 Off 00 0 Not used. Fixed to Off.1 On 02 2 Not used. Fixed to On.2 Off 00 0 Not used. Fixed to Of
2° Byte = User statusBIT OFF/ON HEX Decimal FUNCTION0 Off 00 0 Not used. Fixed to Off.1 Off 00 0 Not used. Fixed to Off.2Off 00 0 No spoolingOn
$11Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Graphic mode.[Format] ASCII - Hex 11 Decimal 17[Descript
1 INTRODUCTION1.1 Command descriptionEach command reported in this manual is described as shown in the following picture. In the fi rst heading line (g
$1B $21Models: PLUS II-USB[Name] Set print mode.[Format] ASCII ESC ! n Hex 1B 21 n Decimal 27 33 n[Range] 0 ≤ n ≤ 255[Description] Selects print
$1B $24Models: PLUS II-USB[Name] Set absolute print position.[Format] ASCII ESC $ nL nH Hex 1B 24 nL nH Decimal 27 36 nL nH [Range] 0 ≤ nL ≤ 2
• To print the bit image use $0A $0D, $1B $4A or $1B $64. • After printing a bit image, the printer returns to normal data processing mode. • This
$1B $30Models: PLUS II-S-0004[Name] Switch-off the printer.[Format] ASCII ESC 0 Hex 1B 30 Decimal 27 48[Description] Switch off the printer and brin
$1B $3DModels: PLUS II-USB[Name] Select peripherals device.[Format] ASCII ESC = n Hex 1B 3D n Decimal 27 61 n[Range] 1 ≤ n ≤ 3[Description] Select
$1B $44Models: PLUS II-USB[Name] Set horizontal tab positions.[Format] ASCII ESC D n1...nk NUL Hex 1B 44 n1...nk 00 Decimal 27 68 n1...nk 0[Ra
$1B $47Models: PLUS II-USB[Name] Turn double-strike mode on/off.[Format] ASCII ESC G n Hex 1B 47 n Decimal 27 71 n[Range] 0 ≤ n ≤ 255[Description]
$1B $4BModels: PLUS II-USB[Name] Turn on/off the status led[Format] ASCII ESC K n Hex 1B 4B n Decimal 27 75 n[Range] n = 0 n = 1[Description]
$1B $4DModels: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Writes the value (dd) in the print mode.[Format] ASC
$1B $52Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Set reverse mode printing.[Format] ASCII ESC R Hex 1
1.2 Print directionThe printer has two printing direction which can be selected by means of the control characters: normal e reverse. PAPER OUTFEED DI
$1B $56Models: PLUS II-USB[Name] Set 90° rotated print mode.[Format] ASCII ESC V n Hex 1B 56 n Decimal 27 86 n[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49[Descri
$1B $5CModels: PLUS II-USB[Name] Set relative print position.[Format] ASCII ESC \ nL nH Hex 1B 5C nL nH Decimal 27 92 nL nH[Range] 0 ≤ nL ≤ 255 0 ≤
$1B $61Models: PLUS II-USB[Name] Select justifi cation.[Format] ASCII ESC a n Hex 1B 61 n Decimal 27 97 n[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50[Description]
BIT 3 BIT 2 FUNCTION DESCRIPTION0 0 NoneHRI Position0 1 Above1 0 Below1 1 Above & belowBIT 5 BIT 4 FUNCTION DESCRIPTION0 0 NormalBarcodewidth0 1 D
$1B $64Models: PLUS II-USB[Name] Print and feed paper n lines.[Format] ASCII ESC d n Hex 1B 64 n Decimal 27 100 n[Range] 0 ≤ n ≤ 255[Description] Pr
$1B $6DModels: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Transmits the print mode in serial.[Format] ASCII ES
$1B $74Models: PLUS II-USB[Name] Select character code table.[Format] ASCII ESC t n Hex 1B 74 n Decimal 27 116 n[Range] n = 0, 2, 3, 4, 5, 19, 255[D
$1B $76Models: PLUS II-USB[Name] Transmit paper sensor status.[Format] ASCII ESC v Hex 1B 76 Decimal 27 118[Range][Description] When this command is
$1B $FAModels: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Print graphic bank ( 384 x 85 dots).[Format] ASCI
001Eh Compression 1 dwordCompression specifi cations. The following values are possible:0 - none (Also identifi ed by BI_RGB)1 - RLE 8-bit / pixel (Also
2 PLUS II EMULATIONThe following table lists all the commands for function management in PLUS II Emulation of the printer. The commands can be transm
Table 1 Select Character Width Table 2 Select character heightHEX Decimal WIDTH HEX Decimal HEIGHT00 0 1 (normal) 00 0 1 (normal)10 16 2 (width = 2x)
$1D $42Models: PLUS II-USB[Name] Turn white/black reverse printing mode on/off.[Format] ASCII GS B n Hex 1D 42 n Decimal 29 66 n[Range] 0 ≤ n ≤ 255
$1D $49Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P PLUS II-USB[Name] Transmit printer ID.[Format] ASCII GS I
$1D $4CModels: PLUS II-USB[Name] Set left margin.[Format] ASCII GS L nL nH Hex 1D 4C nL nH Decimal 29 76 nL nH[Range] 0 ≤ nL, nH ≤ 255[Descripti
$1D $55Models: PLUS II-S, PLUS II-S-0004, PLUS II-T, PLUS II-C, PLUS II-C-0004, PLUS II-P[Name] Resets the printer parameters to default.[Format] AS
Printable areaLeft margin Printing area width[Notes] • This command is only enabled if set at the beginning of the line. • If the right margin is g
nm Barcode system No. of characters Remarks0 UPC-A 11 ≤ k ≤ 12 48 ≤ d ≤ 571 UPC-E 11 ≤ k ≤ 12 48 ≤ d ≤ 572 EAN13 (JAN) 12 ≤ k ≤ 13 48 ≤ d ≤ 573 EAN8 (
When CODE93 is used the printer: • prints an HRI character (o) as a start character at the beginning of the HRI character string • prints an HRI
$1D $70Models: PLUS II-USB[Name] Print logo.[Format] ASCII GS p m n Hex 1D 70 m n Decimal 29 47 m n[Range] 0 ≤ m ≤ 4 (No. logo) n = 0, n = 1, n
$1D $77Models: PLUS II-USB[Name] Set bar code width[Format] ASCII GS w n Hex 1D 77 n Decimal 29 119 n[Range] $1 ≤ n ≤ $6, $81 ≤ n ≤ $86[Description]
Given below are more detailed descriptions of each command.$00Models: PLUS II-USB[Name] Small character printing.[Format] ASCII - Hex 00 Decimal 0[De
Blank pageESC/POS™ Emulation60 Command Reference
4 COMMAND INDEXPLUS II EMULATION $00...6$01...
Blank pageCommand index62 Command Reference
www.custom.bizCUSTOM ENGINEERING SPAWorld HeadquartersVia Berettine, 2 - 43100 FontevivoTel. +39 0521 680111 - Fax +39 0521 [email protected] - ww
$03Models: PLUS II-USB[Name] Expanded printing.[Format] ASCII - Hex 03 Decimal 3[Description] The printer prints in expanded character mode.[Notes]
$0BModels: PLUS II-USB[Name] Forward feeds (n) lines.[Format] ASCII - Hex (n) 0B Decimal (n) 11[Description] Carries out the number of line feeds sp
$11Models: PLUS II-USB[Name] Graphic mode.[Format] ASCII - Hex 11 Decimal 17[Description] Enables graphic mode: a line in 24 column mode correspond
Comments to this Manuals